toshiba_t-series_support:how_do_i_boot_my_t3200sx_with_an_empty_cmos_battery
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
toshiba_t-series_support:how_do_i_boot_my_t3200sx_with_an_empty_cmos_battery [2018-04-09 16:26] omolini created |
toshiba_t-series_support:how_do_i_boot_my_t3200sx_with_an_empty_cmos_battery [2018-04-09 16:30] (current) omolini |
||
|---|---|---|---|
| Line 2: | Line 2: | ||
| * If the CMOS battery is empty, you will be prompted with the following error when you power on the machine. | * If the CMOS battery is empty, you will be prompted with the following error when you power on the machine. | ||
| - | {{ :omolini:toshiba_t-series_support:t3200sx-bios1m.jpg?nolink |}} | + | {{ .:images:t3200sx-bios1m.jpg?nolink |}} |
| To continue from this error screen, do the following: | To continue from this error screen, do the following: | ||
| Line 8: | Line 8: | ||
| * Press F2 to enter System Setup. | * Press F2 to enter System Setup. | ||
| - | {{ :omolini:toshiba_t-series_support:t3200sx-bios.jpg?640 |}} | + | {{ .:images:t3200sx-bios.jpg?640 |}} |
| * If needed, use the cursor keys to move to the menu option titled: ''Hard Disk Setting'' and choose the appropriate values. | * If needed, use the cursor keys to move to the menu option titled: ''Hard Disk Setting'' and choose the appropriate values. | ||
| * My system has the 500 MB hard disk, but I use ANYDRIVE to manually configure the hard drive settings, so I don't need to adjust the Hard Disk values. I only need to press F10 to save settings and reboot. | * My system has the 500 MB hard disk, but I use ANYDRIVE to manually configure the hard drive settings, so I don't need to adjust the Hard Disk values. I only need to press F10 to save settings and reboot. | ||
| - | * Note! If you make the wrong selection on this screen, you can turn the machine off, then while booting, press CTRL + SHIFT + F10 when the computer powers on. If this does not work, you may turn the machine off, wait 5 minutes, then turn it back on. If you have an empty CMOS battery, you will be prompted with the same CMOS error message again. | + | * Note! If you make the wrong selection on this screen, you can do the following: |
| + | * Turn the machine off, then while booting, press CTRL + SHIFT + F10 when the computer powers on. | ||
| + | * If this does not work, you may turn the machine off, wait 5 minutes, then turn it back on. If you have an empty CMOS battery, you will be prompted with the same CMOS error message again. | ||
| + | * You may also manually enter the system configuration, by running the TEST3 utility found at the [[Files and Resources]] section. | ||
| + | << [[..:toshiba_t-series_support|Back to T-series Support page]] | ||
| + | {{tag>Toshiba_T-series_Support:System_Articles}} | ||
toshiba_t-series_support/how_do_i_boot_my_t3200sx_with_an_empty_cmos_battery.1523291200.txt.gz · Last modified: 2018-04-09 16:26 by omolini
Page Tools
