steptail.com

Who put the alphabet in alphabetical order?

User Tools

Site Tools


guides:virtual_modem:section_3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
guides:virtual_modem:section_3 [2018-09-23 04:02]
omolini [Powering up the Raspberry Pi]
guides:virtual_modem:section_3 [2019-02-18 01:39]
omolini [Skip to other sections]
Line 28: Line 28:
 ==== Powering up the Raspberry Pi ==== ==== Powering up the Raspberry Pi ====
   - It could take up to five minutes to boot. Watch the blinking green activity light on the Raspberry Pi indicating that the Raspberry is booting up (see image below with the red arrow). Once the blinking stops, wait another 15-30 seconds before proceeding. If the activity light of Raspberry does not blink at all after powering up, the MicroSD card may not be properly inserted, it may not have been properly flashed or the image used was corrupted. You may need to retrace your steps up to this point. \\ {{ :​guides:​pics:​raspberry_activity.jpg?​500 |}}   - It could take up to five minutes to boot. Watch the blinking green activity light on the Raspberry Pi indicating that the Raspberry is booting up (see image below with the red arrow). Once the blinking stops, wait another 15-30 seconds before proceeding. If the activity light of Raspberry does not blink at all after powering up, the MicroSD card may not be properly inserted, it may not have been properly flashed or the image used was corrupted. You may need to retrace your steps up to this point. \\ {{ :​guides:​pics:​raspberry_activity.jpg?​500 |}}
-  - Verify that the Raspberry Pi is connected to the network. You will see the Ethernet activity lights turn on: \\ {{ :​guides:​pics:​raspberry_eth_activity.jpg?​500 |}}+  - Verify that the Raspberry Pi is connected to the network. You will see the Ethernet activity lights turn on: \\ {{ :​guides:​pics:​raspberry_eth_activity.jpg?​400 |}}
   - By now the Raspberry Pi should be booted, and it should be connected to your network. ​   - By now the Raspberry Pi should be booted, and it should be connected to your network. ​
  
-==== Find your Raspberry'​s IP address ====+==== Find out your Raspberry'​s IP address ====
   - To locate the IP address of your Raspberry Pi, easiest way is to log on to your router and find the IP there. ​   - To locate the IP address of your Raspberry Pi, easiest way is to log on to your router and find the IP there. ​
     - By default, most routers homepage can be reached at http://​192.168.0.1/,​ http://​192.168.1.1/​ or http://​10.0.0.1/​. Most routers username and password is admin/​admin,​ root/root, root/​password or a combination thereof. The correct default password can be found in the manual of the router. ​     - By default, most routers homepage can be reached at http://​192.168.0.1/,​ http://​192.168.1.1/​ or http://​10.0.0.1/​. Most routers username and password is admin/​admin,​ root/root, root/​password or a combination thereof. The correct default password can be found in the manual of the router. ​
-  - Once you have logged on to your router, look for your connected devices, you should see the raspberry pi and it's IP address. In my case it is **10.0.16.141**. Save this IP address for later use. \\ {{ :​guides:​pics:​router_info_with_raspberry_highlighted.jpg?​500 |}}+  - Once you have logged on to your router, look for connected ​network ​devices. You should see the Raspberry Pi and it's IP address. In my case it is **10.0.16.141**. Save this IP address for later use. \\ {{ :​guides:​pics:​router_info_with_raspberry_highlighted.jpg?​600 |}}
   - Alternatively you can use the official guide at: \\ https://​www.raspberrypi.org/​documentation/​remote-access/​ip-address.md   - Alternatively you can use the official guide at: \\ https://​www.raspberrypi.org/​documentation/​remote-access/​ip-address.md
   - Alternatively you can use the Raspberry Pi Finder app from Adafruit at: \\ https://​learn.adafruit.com/​the-adafruit-raspberry-pi-finder/​overview   - Alternatively you can use the Raspberry Pi Finder app from Adafruit at: \\ https://​learn.adafruit.com/​the-adafruit-raspberry-pi-finder/​overview
Line 74: Line 74:
   * [[Guides:​Connecting Windows 95/98 to the Internet]]   * [[Guides:​Connecting Windows 95/98 to the Internet]]
   * [[Guides:​Connecting a Digital VT100 compatible terminal to the Internet]]   * [[Guides:​Connecting a Digital VT100 compatible terminal to the Internet]]
 +  * [[guides:​List of Compatible Websites]] List of websites that will work with pre-2000 legacy web browsers.
 +  * [[Guides:​Virtual Modem:​Script|Source code and Coding Examples]]
  
 ---- ----
guides/virtual_modem/section_3.txt · Last modified: 2022-12-17 19:37 by omolini