This is an old revision of the document!
Connect Windows 95/98/Me to the Internet with dial-up and Raspberry Pi
This step-by-step guide will show you how to get a Windows 95/98/Me computer connected to Ethernet and the Internet using just a serial port and Virtual Modem software running on your Raspberry Pi host system or other system of choice. If you have not already, please follow the instructions how to set up Virtual Modem as it is a prerequisite for this tutorial. Make sure the serial cable is connected to the Raspberry and the vmodem.sh script is running on it before attempting this part of the guide. You can manually run vmodem.sh to see what is happening on the console of the Raspberry Pi if you need to troubleshoot.
You can connect to the Internet with the built-in dial-up functionality of Windows 95/98/Me, no network card needed. We will go through the steps how to set up a modem and then a dial-up connection on your Windows 95 (or later) computer. For the sake of completeness, we will then test the connection using Netscape Communicator 4.0, but you're free to use any web browser.
Once again, please make sure you have VModem set up and running and a serial cable is connected between the Raspberry Pi and your Windows 9x computer before attempting the following steps.
A work in progress!
I am currently in the process of writing this guide. At it's current state the tutorial is in PRE-ALPHA. This message will be updated as I continue to work on this tutorial series.
Modem Setup
For you to connect to VModem running on your Raspberry Pi, you must first tell Windows 95 that you have a modem that you can use, and it is connected to your serial port on your computer and it is a Standard Modem. Once you've set up the modem, you can set up the dial-up connection.
Some computers have several serial ports, usually labeled COM1 and COM2 in Windows. We will be using the first serial port COM1. If you have the Raspberry connected on any other port, make adjustments as necessary.
Select the Serial COM port the Raspberry is connected to. If you've connected your Raspberry Pi via Serial cable to Serial Port 1 (COM1), select Communications Port (COM1), then click Next:
We will now tell Windows that the Raspeberry Virtual Modem is communicating at 57600 bps. This is the default speed of the vmodem script. If you have modified the script, make adjustments as needed. Under Maximum speed, select 57600 and then click OK:
Dial-up Setup
Almost there! What we need to do next is tell Windows that there is a phone number you want to dial, and the modem you want to use is Raspberry Pi Virtual Modem. Go ahead and open up Dial-Up Networking from the Start menu:
Internet Access
You should now be able to access the Internet. However, many modern websites will require modern security and will refuse to communicate with older web browsers.
-
If you'd like to access archived websites directly from your browser by typing in the
URL, you can set up a proxy server that can serve archived websites. The Steptail Wayback Proxy Server (wayback.steptail.com:8080) is straightforward to set up in many web browsers, and will allow you to access websites circa 1996-1998.
Click here for the guide to set up a proxy server on older web browsers
I also made a easily-accessible gateway website to access archived copies of a selection of great websites that you can browse with your retro machine.
Click here to access the gateway website, or type in the
URL “wayback.steptail.com” using your legacy web browser.
Netscape 3.0 Gold
Netscape Navigator 4.0
Open up Netscape Navigator 4.0
Go to Edit –> Preferences
Under Advanced, open Proxies
Select “Manual proxy configuration” and click on “View”.
Select the first field and type in the server name of the wayback proxy (wayback.steptail.com):
Netscape 4.5
Troubleshooting
Unable to connect on dial-up
Dial-up connects, but no websites open
Most current websites do not support unencrypted HTTP connections. As far as I understand, old operating systems do no longer have valid certificates, and this prevents connections to most websites. You can still explore archived websites using a Wayback Proxy server. See the section
Internet Access for more information.
If your dial-up connection works, but you're absolutely not able to open any website, even after setting up the proxy server, try checking your IP configuration. In Windows 95, 98 and Me you can view your settings by running WINIPCFG from the Run dialog box.